Gauss

Bromure de potassium, for IR spectroscopy Uvasol , x 100 g-RUO

Réf. UGAP : 4074230 Réf. Fournisseur : 1049070100 Réf. Constructeur : 1049070100
Bromure de potassium, for IR spectroscopy Uvasol , x 100 g-RUO
Bromure de potassium, for IR spectroscopy Uvasol , x 100 g-RUO
Franco de port et d'emballage pour toutes les commandes supérieures à 80€ HT.


Produit ni repris ni échangé excepté en cas d’erreur du prestataire.
La quantité choisie doit être comprise entre 1 et 999 999.

Points clés

Potassium bromide is transparent from the near UV to long wave IR wavelengths. In IR-spectroscopy, solid samples which are difficult to melt or dissolve in any suitable IR-transmitting solvent, are analyzed by grinding with Potassium bromide powder, and pressing into a disc. This procedure has a high quality demand of the used potassium bromide. Potassium bromide Uvasol is adjusted to a mean particle size of 150 μm. This is sufficient for the preparation of perfectly good pellets without the need for further pre-treatment and the associated risk of contamination. It also retains its powdery form over a period of years if stored in an air-tight condition. Its physical suitability for pelletising is checked by a special application test and its chemical purity established by full spectrum FT-IR analysis.

En savoir plus

Garantie

Garantie 0 Mois

Description

Potassium bromide is transparent from the near UV to long wave IR wavelengths. In IR-spectroscopy, solid samples which are difficult to melt or dissolve in any suitable IR-transmitting solvent, are analyzed by grinding with Potassium bromide powder, and pressing into a disc. This procedure has a high quality demand of the used potassium bromide. Potassium bromide Uvasol is adjusted to a mean particle size of 150 μm. This is sufficient for the preparation of perfectly good pellets without the need for further pre-treatment and the associated risk of contamination. It also retains its powdery form over a period of years if stored in an air-tight condition. Its physical suitability for pelletising is checked by a special application test and its chemical purity established by full spectrum FT-IR analysis.

Caractéristiques

Fournisseur
SIGMA ALDRICH CHIMIE
Marque
SUPELCO
Nomenclature DGOS
LC13AOOO
Vendu par
100 g
Code à barre
oui
Lieu de stockage
Lyon
Seuil de coupure des masses moléculaires MWCO
119,00 Da
Densité
2,75 g/cm3 at 20 °C g/ml
Nomenclature IFPEN
NA.24
Type d’application
analyse
Nomenclature INSERM
NA.NA24
Nomenclature CHU
18.552
Nomenclature IRSN
273
Soumis à carboglace
non
Numéro CAS
7758-02-3
Quantité
N/A
Nomenclature CEA
SGP01
Référence fabricant
1049070100
Nomenclature CNRS
NA24
Certification
RUO
Type de produit
solvant
Température de conservation (°C)
2-30 °C
Nomenclature Nacres
NA.24
Lieu de fabrication
Allemagne
Gamme de pH
5.5-8.5 (20 °C, 50 g/L in H2O)
Etat
solide
Domaine de recherche
biochimie
Référence distributeur
1049070100
Reprise en cas d’erreur client
non
Délai de péremption à la date de livraison
12 mois